Generator set data sheet
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 890kW prp ; 980kW standby
- Manufacturer: MITSUBISHI
- Model: S12H PTA
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 150 x 175 mm
- Displacement: 37,11 L
- Cooling System: Water
- Lube Oil Specifications: API CD or CF SAE 30 or SAE 40
- Compression Ratio: 14,0:1
- Fuel Consumption ESP: 237,11 l/h
- Fuel Consumption 100% PRP: 216,75 l/h
- Fuel Consumption 75 % PRP: 166,78 l/h
- Fuel Consumption 50 % PRP: 117,52 l/h
- Fuel Consumption 25 % PRP: 68,61 l/h
- Lube oil consumption with full load: 0,8
- Total oil capacity including tubes, filters 200 L
- Total coolant capacity: 244 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 212 mm
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Radiator with pusher fan
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: MECC ALTE
- Model: ECO43 2M/4 A
- Poles: 4
- Connection type (standard): Star - Parallel
- Mounting type: S-0 18''
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - CONTAINER VERSION.
- Soundproofing provided by high-density volcanic rock wool
- High mechanical resistance
- Low level of noise emissions
- Door with window to visualize control panel, alarms and measurements
- Reinforced lifting points for crane hoisting and lower ones for transportation by forklift
- Residential steel silencer with -35dB attenuation and tilting cap in the exhaust
- Fuel tank integrated in the chassis
- Anti-vibration shock absorbers
- Steel chassis
- Manual oil extraction pump
- Robust construction designed for continuous or emergency applications
- Stainless steel fittings
- Emergency stops
- Easy access to the power connection
- Reinforced chassis for heavy range
- Easy access for chassis cleaning
- Silent-block with anti-corrosion protection between the genset and the chassis
- Easy access to fill radiator through the roof
- - ELECTRICAL SYSTEM CONTAINER.
- Control panel and emergency stop button
- Power panel
- Battery charger (standard on automatic control panels)
- Water Jacket Heater with single phase pump
- Battery charge alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Power panel with safety protection in output terminals box (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery isolator
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 515 ºC
- Exhaust Gas Flow: 220 m3/min
- Maximum allowed back pressure: 600 mm H2o
- Heat dissipated by exhaust pipe: 616,71 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 4980 m3/h
- Cooling Air Flow: 30 m3/s
- Alternator fan air flow: 1,5 m3/s
- - STARTING SYSTEM.
- Starting power: 7,5 x 2 kW
- Starting power: 10,2 x 2 CV
- Recommended battery: 300 Ah
- Auxiliary Voltage: 24 Vdc
- Starter current peak: 720 A
- Nominal starter current: 380 A
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Maximum power suction pump: 75 mm Hg
- Maximum return feed pump: 220 mm Hg
- Fuel Tank: 1.000 L
- - DIMENSIONS.
- Length: 6.058 mm
- Height: 2.896 mm
- Width: 2.438 mm
- Maximum shipping volume: 42,77 m3
- Weight with liquids in radiator and sump: 13.905 kg
- Fuel tank capacity: 1.000 L
- Autonomy: 6 Hours
- Sound pressure level: 80 ± 2,4 dB(A)@7m
Length (A)00.00
Width (B)00.00
Height (C)289.6114.02
Weight with fluids in radiator and crankcase
13905
30660.525
