Generator set data sheet
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 768,8kW prp ; 853,8kW standby
- Manufacturer: HYUNDAI
- Model: DP222CC
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 128 x 142 mm
- Displacement: 21,927 L
- Cooling System: Coolant
- Lube Oil Specifications: 10W-40 (API CJ-4, CK-4)
- Compression Ratio: 14,6:1
- Fuel Consumption ESP: 212 l/h
- Fuel Consumption 100% PRP: 190 l/h
- Fuel Consumption 75 % PRP: 147 l/h
- Fuel Consumption 50 % PRP: 102 l/h
- Fuel Consumption 25 % PRP: 62 l/h
- Total oil capacity including tubes, filters 78 L
- Total coolant capacity: 66 L
- Governor Type Electrical
- Air Filter Type Dry
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Radiator with pusher fan
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: S6L1D.D4
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-00 18"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Elastic Coupling
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Tilting cap in the exhaust
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- External emergency stop switch
- Bodywork made from high quality steel plate
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Fuel transfer pump
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
- 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
- Manual oil drain pump (Optional)
- Chassis drain plug (Optional)
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery Switch
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Water Jacket Heater (Optional)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 535 ºC
- Exhaust Gas Flow: 147 m3/min
- Maximum allowed back pressure: 5,9 kPa
- - NECESSARY AMOUNT OF AIR.
- Cooling Air Flow: 21,1 m3/s
- Alternator fan air flow: 1,42 m3/s
- - STARTING SYSTEM.
- Starting power: 7 kW
- Starting power: 9,52 CV
- Auxiliary Voltage: 24 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 1.000 L
- - DIMENSIONS.
- Length: 5.960 mm
- Height: 2.856 mm
- Width: 2.622 mm
- Maximum shipping volume: 44,63 m3
- Weight with liquids in radiator and sump: 8.141 kg
- Fuel tank capacity: 1.000 L
- Autonomy: 7 Hours
- Sound pressure level: 77 ± 2,4 dB(A)@7m
Length (A)596234.65
Width (B)262.2103.23
Height (C)285.6112.44
Weight with fluids in radiator and crankcase
8141
17950.905
