Generator set data sheet
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 774kW cop ; 1106kW prp
- Manufacturer: YANMAR
- Model: AY40L-ET
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 155 x 180 mm
- Displacement: 40,76 L
- Cooling System: Coolant
- Lube Oil Specifications: API CF or CH4, SAE 15W-40
- Compression Ratio: 14,35:1
- Fuel Consumption 100% PRP: 257,9 l/h
- Fuel Consumption 75 % PRP: 189,2 l/h
- Fuel Consumption 50 % PRP: 131,1 l/h
- Fuel Consumption 25 % PRP: 74,3 l/h
- Lube oil consumption with full load: 0,75
- Total oil capacity including tubes, filters 190 L
- Total coolant capacity: 359 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 205 mm
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Remote radiator
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Water separator filter (no visible level) (Optional)
- Generator: STAMFORD
- Model: PI734B
- Poles: 4
- Connection type (standard): Star
- Mounting type: S-00 21"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - CONTAINER VERSION.
- Soundproofing provided by high-density volcanic rock wool
- High mechanical resistance
- Low level of noise emissions
- Door with window to visualize control panel, alarms and measurements
- Reinforced lifting points for crane hoisting and lower ones for transportation by forklift
- Residential steel silencer with -35dB attenuation and tilting cap in the exhaust
- Fuel tank integrated in the chassis
- Anti-vibration shock absorbers
- Steel chassis
- Manual oil extraction pump
- Robust construction designed for continuous or emergency applications
- Stainless steel fittings
- Emergency stops
- Easy access to the power connection
- Reinforced chassis for heavy range
- Easy access for chassis cleaning
- Silent-block with anti-corrosion protection between the genset and the chassis
- Easy access to fill radiator through the roof
- Back panel (Optional)
- - ELECTRICAL SYSTEM CONTAINER.
- Control panel and emergency stop button
- Power panel
- Battery charger (standard on automatic control panels)
- Battery charge alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Power panel with safety protection in output terminals box (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery isolator
- Heating resistor (Optional)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 493 ºC
- Exhaust Gas Flow: 241,8 m3/min
- Maximum allowed back pressure: 6 kPa
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 6084 m3/h
- Cooling Air Flow: 22,2 m3/s
- Alternator fan air flow: 2,69 m3/s
- - STARTING SYSTEM.
- Starting power: 8 kW
- Starting power: 10,88 CV
- Recommended battery: 75 x 4 Ah
- Auxiliary Voltage: 24 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 999 L
- - DIMENSIONS.
- Length: 6.058 mm
- Height: 2.591 mm
- Width: 2.438 mm
- Maximum shipping volume: 38,27 m3
- Fuel tank capacity: 999 L
- Autonomy: 5 Hours
- Sound pressure level: 68 ± 2,4 dB(A)@7m
Length (A)605.8238.50
Width (B)243.895.98
Height (C)259.1102.01
Weight with fluids in radiator and crankcase
0
0
