Generator set data sheet
- Engine Specifications 1.800 r.p.m.
- Rated Engine Output: 148kW cop ; 188kW prp ; 208kW standby
- Manufacturer: FPT_IVECO
- Model: N67.TE3PV
- Engine Type: 4-stroke diesel
- Injection Type: Direct, common rail
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 104 x 132 mm
- Displacement: 6,7 L
- Cooling System: Coolant
- Lube Oil Specifications: 10W40 CJ4 / CK4 ACEA E9
- Compression Ratio: 16,5:1
- Fuel Consumption ESP: 52,2 l/h
- Fuel Consumption 100% PRP: 48,8 l/h
- Fuel Consumption 80 % PRP: 40,7 l/h
- Fuel Consumption 50 % PRP: 27,3 l/h
- Fuel Consumption 25 % PRP: 7,2 l/h
- Lube oil consumption with full load: 0,3 % of fuel consumption
- Total oil capacity including tubes, filters 17 L
- Total coolant capacity: 36,2 L
- Governor Type Electrical
- Air Filter Type Dry
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 12V electrical system
- Water separator filter (no visible level)
- Dry air filter
- Radiator with pusher fan
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: UCI274G
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-3 11"1/2
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-vibration shock absorbers
- Fuel tank
- Fuel level gauge
- External emergency stop switch
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Watertight chassis (acts as a double barrier against liquid retention)
- Fuel tank drain plug
- Chassis drain plug
- Chassis ready for future mobile kit installation
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- Versatility to assemble a high capacity chassis with a metallic fuel tank
- IP Protection according to ISO 8528-13:2016
- 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Battery Switch
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 600 ºC
- Maximum allowed back pressure: 20 kPa
- Exhaust Flange Size (external diameter): 120 mm
- - NECESSARY AMOUNT OF AIR.
- Alternator fan air flow: 0,617 m3/s
- - STARTING SYSTEM.
- Auxiliary Voltage: 12 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 450 L
- Other fuel tank capacities: 600, 1.100 L
- - DIMENSIONS.
- Length: 3.300 mm
- Height: 1.956 mm
- Width: 1.200 mm
- Maximum shipping volume: 7,75 m3
- Weight with liquids in radiator and sump: 2.255 kg
- Fuel tank capacity: 450 L
- Autonomy: 11 Hours
- Sound pressure level: 68 ± 2,4 dB(A)@7m
Length (A)330129.92
Width (B)12047.24
Height (C)195.677.01
Weight with fluids in radiator and crankcase
2255
4972.275
Length (A)330129.92
Width (B)12047.24
Height (C)195.677.01
Weight with fluids in radiator and crankcase
2345
5170.725
Length (A)330129.92
Width (B)12047.24
Height (C)217.985.79
Weight with fluids in radiator and crankcase
2505
5523.525
