Generator set data sheet
- Engine Specifications 1.800 r.p.m.
- Rated Engine Output: 228,7kW prp ; 252,7kW standby
- Manufacturer: FPT_IVECO
- Model: N67.TE8P
- Engine Type: 4-stroke diesel
- Injection Type: Direct, common rail
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 104 x 132 mm
- Displacement: 6,7 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: 10W-40 (API CJ-4, CK-4)
- Compression Ratio: 17:1
- Fuel Consumption ESP: 63,81 l/h
- Fuel Consumption 100% PRP: 55,83 l/h
- Fuel Consumption 80 % PRP: 44,64 l/h
- Fuel Consumption 50 % PRP: 28,81 l/h
- Fuel Consumption 25 % PRP: 16,19 l/h
- Lube oil consumption with full load: 0,3 % of fuel consumption
- Total oil capacity including tubes, filters 17 L
- Total coolant capacity: 27,6 L
- Governor Type Electrical
- Air Filter Type Dry
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Water separator filter (no visible level)
- Dry air filter
- Radiator with pusher fan
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: UCDI274J
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-3 11"1/2
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-vibration shock absorbers
- Fuel tank
- Fuel level gauge
- External emergency stop switch
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Reinforced lifting hooks for crane hoisting
- Watertight chassis (acts as a double barrier against liquid retention)
- Fuel tank drain plug
- Chassis drain plug
- Chassis ready for future mobile kit installation
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- Versatility to assemble a high capacity chassis with a metallic fuel tank
- IP Protection according to ISO 8528-13:2016
- 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Battery Switch
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- - EXHAUST SYSTEM.
- Maximum allowed back pressure: 0,02 kPa
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 775,6 m3/h
- Cooling Air Flow: 3,97 m3/s
- Alternator fan air flow: 0,69 m3/s
- - STARTING SYSTEM.
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 449 L
- Other fuel tank capacities: 999 L
- - DIMENSIONS.
- Length: 3.800 mm
- Height: 2.253 mm
- Width: 1.400 mm
- Maximum shipping volume: 11,99 m3
- Weight with liquids in radiator and sump: 3.072 kg
- Fuel tank capacity: 449 L
- Autonomy: 10 Hours
Length (A)380149.61
Width (B)14055.12
Height (C)225.388.70
Weight with fluids in radiator and crankcase
3072
6773.76
Length (A)380149.61
Width (B)14055.12
Height (C)261.5102.95
Weight with fluids in radiator and crankcase
3574
7880.67
